Replacement Parts for Double K 401 Belt Mounted (401 BMC)



Diagram coming soon.

438 (Diag.1) Rivet - Belt Clip (2 Required)
$0.66
537 (Diag.3) Power Cord (12 Foot)
$13.62
414 (Diag.4) Belt Clip
$11.18
5546 (Diag.5) Screw - Motor Housing Cover (3 Required)
$0.66
417 (Diag.6) Screw - Handpiece Clip
$0.66
424 (Diag.7) Rivet - Handpiece Clip
$0.66
5533 (Diag.8) Nut - Belt Clip Screw
$0.66
479 (Diag.9) Nut (Acorn) - Motor Mount (2 Required)
$0.66
9028 (Diag.10) Washer - Motor Mount (2 Required)
$0.66
423-1 (Diag.11) Motor with Lead Wires
$121.39
0.66 (Diag.12) Nut - Speed Control / Switch
$5,517.00
447-1 (Diag.13) Speed Control / Switch
$46.08
402 (Diag.14) Knob - Speed Control / Switch (Off/Low-High)
$5.08
421 (Diag.15) Adapter - Cable Housing
$11.32
493 (Diag.16) Screw - Cable Adapter Housing (2 Required)
$1.32
422 (Diag.17) Set Screw - Cable Adapter Housing / Small Flywheel (3 Required)
$0.66
413 (Diag.18) Plug - Housing (2 Required)
$0.76
401 (Diag.19) Cover - Motor Housing
$19.06
534 (Diag.20) Grommet - Power Cord
$0.78
416-1 (Diag.21) Housing - Motor
$59.76
516 (Diag.22) Shaft - Lever Drive
$21.16
505 (Diag.23) Bearing - Drive Shaft (2 Required)
$12.86
506 (Diag.24) Bearing - Drive Lever
$15.08
592 (Diag.25) Flywheel (Large)
$9.68
591 (Diag.26) Flywheel (Small)
$7.64
411 (Diag.27) Set Screw - Large Flywheel
$0.66
409 (Diag.28) Retaining Ring - Drive Shaft (2 Required)
$0.76
507 (Diag.29) Retaining Ring - Drive Lever Bearing
$0.76
512 (Diag.30) Housing - Lower (Handpiece)
$47.08
3025 (Diag.31) Latch - Blade
$4.45
515 (Diag.32) Steel Ball - Cable Spring Clamp
$3.52
514 (Diag.33) Spring Clamp - Cable
$3.94
444 (Diag.34) Screw - Hinge (2 Required)
$1.08
480 (Diag.35) Washer - Drive Lever
$0.68
598 (Diag.36) Drive Lever w/Bushing
$4.75
508 (Diag.37) Seal / Felt - Drive Lever (2 Required)
$0.94
517 (Diag.38) Housing - Upper (Handpdiece)
$30.73
502 (Diag.39) Cover / Name Plate - Handpiece
$6.20
501 (Diag.40) Screw - Cover / Name (2 Required)
$0.85
513 (Diag.41) Screw - Housing Handpiece (4 Required)
$0.66
545-06 (Diag.42) Power Cable / Flex Shaft Assembly (6 Foot)
$67.68
3026 (Diag.43) Hinge - Blade
$9.83
10307 (Diag.44) Insulator - Bearing
$0.30
9042-1 (Diag.45) Rectifier
$23.88
418A (Diag.46) Spring Clip - Handpiece
$11.18
500 (Diag.47) Clipper Handpiece Assembly (Not Shown)
$173.48

Hemp's Clippers & Supply • 13407 Graceham Rd • Thurmont, MD 21788
Phone Orders Accepted. Call 301-898-9916. Any inquiries or questions, email us.
Home | About Us | Clipper Inventory | Clipper Repair Center