The Aesculap GH575 Blade Set Stand keeps up to five blade sets together and ready for use at a grooming workstation. It provides a designated place for a working selection of blades, helping the user organize the heads needed during clipping.

The stand is made from red plastic. Its five-blade capacity is useful when several cutting lengths are used during a grooming session and the next blade needs to remain accessible.

GH575 identifies the stand itself. Use this model reference when selecting the organizer for your equipment setup; the blade sets stored in it are separate grooming tools.

Aesculap GT604 Clipper Oil is a 90 ml bottle of specialist lubricant for Aesculap clippers and the moving parts of their blade sets. It is a routine maintenance supply for groomers and equipment owners keeping the cutting assembly properly lubricated.

The oil is used at the lubrication points specified for the machine and blade. Aesculap's blade-care guidance calls for oiling before and during clipping, since a blade that runs without adequate lubrication can become hot. The manufacturer also recommends oiled, dry storage to help protect steel blades from corrosion between uses.

Cleaning and lubrication work together: remove trapped hair from the blade assembly, then apply the oil as directed in the equipment instructions. The required points and procedure vary by clipper, so use the relevant manual when maintaining a particular model.

GT604 is the manufacturer's blade-and-clipper oil reference, supplied here in a 90 ml bottle. Keeping that reference with a maintenance kit makes it easier to identify the specified lubricant when replenishing supplies or following an Aesculap service instruction.

Aesculap GT605 Special Grease is a 20 ml tube of maintenance grease for equipment whose instructions specify this lubricant. It provides the manufacturer's identified grease for designated mechanical lubrication points, including the gear assembly described in the Bonum large-animal clipper manual.

That manual lists GT605 as gear grease and gives a separate procedure for applying it to the gear wheel after the cutter head is removed. This makes the product reference useful when assembling maintenance supplies or following a service procedure for a compatible Aesculap machine.

Apply the grease only at the points and in the quantity specified in the relevant equipment instructions. For the documented Bonum procedure, the battery must be removed before the head is taken off. Follow the complete model-specific instructions for disassembly, lubrication and refitting.

The tube contains 20 ml. Check the GT605 reference against the machine documentation when selecting lubricant for a maintenance task.

Hemp'sClippers& Supply

Aesculap Clipper Accessories