The Aesculap GT594 is a 13-tooth lower comb for Econom sheep shearing equipment. Its outer teeth curve outward, giving it the flared shape that distinguishes this model within the manufacturer's comb range. Aesculap lists a cutting length of 3.5 mm.

The GT594 is documented for the GT369 sheep-shearing head and is listed among the accessories for the Econom NOVA GT694. Those references provide specific equipment matches when selecting a replacement comb or an alternative lower plate for an existing shearing setup. Match the GT594 part number as well as the tooth count: the outward-curving teeth are a defining feature of this version.

Maintain the cutting assembly according to the shearing machine's instructions. Correct blade positioning, suitable pressure and regular lubrication are part of routine setup, and the plates should be clean and oiled for dry storage.

The Aesculap GT588 is a 13-tooth lower comb for Econom sheep shearing machines. Its manufacturer-listed cutting length is 3.5 mm. It is intended for owners replacing the lower cutting plate on a compatible shearing head, with Aesculap specifically naming GT494 and GT824 machines.

The GT369 head's parts list pairs this comb with the GT578 four-tooth upper cutter. Check both part numbers when servicing that assembly so the lower comb and moving cutter match the documented setup. This item is the lower comb component; the cutter is a separate part of the system.

For installation, follow the machine manual's positioning and tension procedure. Keep the cutting plates well lubricated while working. After cleaning away wool residue, dry and re-oil the plates before storage to prepare them for the next shearing session.

The Aesculap GT578 is a four-tooth upper cutter for sheep shearing equipment in the Econom range. It is the moving cutting plate used with a separate lower comb, making it a replacement component for a shearing setup rather than a complete blade set.

The GT578 is listed for the GT369 head and is also supplied on the Econom NOVA GT694, where it works with the GT598 comb. Owners maintaining an older GT369 assembly can identify it as the upper partner to the GT588 lower plate.

Keep the cutting plates lubricated during shearing and follow the machine's instructions when replacing or tensioning them. Aesculap notes that upper cutters require replacement more frequently than lower combs. Inspecting both components when renewing a cutter helps you plan the rest of the blade maintenance.

Hemp'sClippers& Supply

Aesculap Shears, Combs & Cutters